Payment & Shipping Terms:
|Whole Volume:||1300L||Working Capacity:||1000L|
|Jacket Working Pressure:||0.25Mpa||Heating Area:||3.6m2|
|Output Hole Diameter:||800mm||Steam Consumption:||115kgs/h|
This equipment can be used for herbal. Plant, food’s decoction, warm soaking, heat reflux, forced circulation, permeability percolation, aromatic oil extraction and organic solvent recovery process under atmospheric pressure or pressure. It has advantage of high efficiency and easy operation. Therefore,it is widely used in pharmaceutical,food, chemical and other industries. This equipment’s extraction technique can choose straight cylinder, cone, oblique cone, mushrooms and other forms.
1) The equipment has the functions of heating and heat preservation. It is manufactured, pressure-tested and checked in accordance with the <Technology Specifications for Steel Welded Vessel>.
2) The standard specification from 100L to 7000L and order-design or order-manufacture are all available.
3) The joint is of quick-acting type in compliance with ISO standard. The inner part is made of SUS316L or SUS304. At the tanks body are respectively fluid level gauge (the mode is non-contact supersonic, static-pressure transmission or glass tube), breathing apparatus, sterilization steam opening,the rmometer (digital-indicated type or dial type), CIP universal tank-cleaning device, view mirror at lamp hole, some fluid inlets & outlets and herringbone hole.
Main Technical Data:
|Vacuumization(MPa/ ℃)||0.04mpa(85 ℃)|
1. It is designed according to the principle that the steam contains less heat energy under the low temperature (Vacuum) condition than it does under the high temperature condition,while under the low temperature condition, the heat of vaporization is high instead.
2. Referring to the related foreign data, an excellent structure has been adopted in evaporator and heater to remove the steam resistance, decrease the vacuum loss,and reduce the heat wastage,which has gained remarkable energy-saving affection.
3. A strong flow technology of external heating temperature difference cycle has been adopted,which can make cycle speed high, evaporating speed fast,the time of receiving heat short,and not to curdle easily.Its concentrating ratio can reach 1.4 or so.
4. The whole body is made of stainless steel;Passed GMP certification.
The appearance and characteristics are very close to the low iodine value of linseed oil, but slightly greenish.
The approximate fatty acid composition is: 10.1% saturated acid, 16% oleic acid, 46% linoleic acid, and 28% linolenic acid.
The acid value is 3 mg KOH/g, the iodine value is 149-167, and the relative density is 0.925-0.933 (15/15 ° C). The freezing point is about 16 °C.
The main ingredients are glycerides of linoleic acid, linolenic acid and oleic acid.
Used in industries such as paints and soaps.
Contact Person: Chan Baggio