Payment & Shipping Terms:
|Packaging Type:||Alu/PVC And Alu/Alu||Control System:||Micro Computer|
Stable DPP - 250A Blister Packaging Equipment For Tablets And Capsules
1.Travel scope can be adjusted.Mould is located by located groove so that it's easy to change mould,The machine heats the PVC through conduction and forms it through pressing and frothing.
2.The material is fed automatically.The mould and feeding equipment can be desi-gned as user's requir ements.
3.The heating moulds will automatically separate when the machine stops,which contributes to protect the material between them and extend the machine's life.
4.The equipment of trace pressing,batch number printing and scrap-collecting can be chose.
5.Manipulator grip and tow wrapper,straight to-and-fro running,synchroning accu-rately and stably.
6.Speed is shifted by stepless transducer;the operation panel of PC cycle (can be adopted interface of human-machine).
Main Technical Data:
|Blanking frequency (cutting):||15-45|
|Sheet's quantity of one blanking (sheets):||1-6(depends to your blister size)|
|Adjustable scope of feed travel: (mm)||10-120|
|Max Forming depth (mm) PVC:||270×120×25|
|Capacity of air compressor(m3/min):||≥0.36|
|Power supply (KW):||220V AC, 50 Hz, Three Phase (Depend on your requirement.|
l Travel scope can be adjusted.
l Mould is located by locating groove so that it’s easy to change mould. Adopt the moulds of pressing-and-frothing and cool-forming.
l The material is fed automatically. The mould and feeding equipment can be designed as user’s requirements.
l Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller.
l Adopt photoelectric empty-detecting equipment and waster-eliminating equipment.
l Servo motor drive wheel to grip and tow wrapper, synchronize accurately. And it will be not waste of time and material for adjusting when restart the machine.
l The machine equipped Camera Cell for sensor, make the length in an accurate number.
l The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.
Contact Person: Chan Baggio