Contact Person : Chan
Phone Number : 008613396976533
May 28, 2021
The reason and correct operation of V-type mixer asymmetry
Due to the excellent performance and relatively complex system parameters of V-type mixer, if non professionals do not understand, it is easy to have some fault problems in the early use, such as the asymmetry phenomenon when using V-type mixer. What is the reason for the asymmetry of V-type mixer in the mixing work? So, how do we operate the V-type mixer? Now, I'll give you a brief introduction.
The causes of V-type mixer asymmetry are as follows:
The mixing drum is two asymmetric cylinders, and the mixing drum is composed of two cylinders δ 3mm304 high quality stainless steel plate ring is formed by circular seal welding. Both ends of the V-type mixing cylinder are equipped with elliptical heads, and feed ports are installed on both heads, which is more conducive to the cleaning of the cylinder after the mixing of materials.
The transmission system is composed of motor, reducer, chain wheel, bearing, transmission shaft and other parts. The transmission shaft is fixed and welded on the cylinder wall, and has δ 5.0 mm steel plate reinforcement, no shaking, no eccentric phenomenon in the working process, low noise, easy maintenance, long service life, smooth operation and other characteristics.
The frame of the mixer is welded with channel steel, and the welding is firm. The frame is made of 304 stainless steel, with smooth surface and no scratch. The two ends of the transmission frame are movable doors, which are convenient for maintenance and repair.
The electrical control is sensitive. The control of mixing time is controlled by digital time relay. The mixing time is set according to the requirements of the actual production process of mixing. The inching button is used to move the cylinder to the appropriate loading position for feeding and discharging. It reduces the labor intensity and improves the production efficiency.
Correct operation of V-type mixer:
In the case of conveying materials, open the feed port of the mixer, close the discharge port according to the technical control requirements, and put a certain amount of materials into the V-shaped hopper. At the end of feeding, in order to avoid material flowing out during mixing, the feeding port must be closed and locked.
During the operation time of the machine, turn on the power button, turn the stop button to the left, start the reverse button of the mixer, and adjust the motor speed within the speed range specified in the technical rules to mix the goods at 600 R / min. When the mixture reaches the technical rules, after the speed button of the conditioning motor stops, the discharge port of the mixer should face the ground, the speed button of the regulating motor should be adjusted to 0 V mixer, and the stop button should be rotated to the right to block the power supply.
One end of the V-type mixer is equipped with a motor and a reducer. The power of the motor is transmitted to the reducer through the belt, and then the reducer is transmitted to the v-barrel through the coupling. The V-shaped barrel operates one by one, and the materials in the moving barrel are mixed, downward, left and right in the barrel.
The V-type mixer organizes the moving cylinder by decelerating rotation, and uses the asymmetry formed by the unequal length of the two cylinders of the mixer to mix. When the mixer moves, due to the difference of potential energy, the material changes from differentiation to combination. Due to the difference of potential energy, the transverse force is generated to promote the horizontal transfer of material. When materials from combination to differentiation, due to the different levels of materials, transverse force is generated to promote the horizontal transfer of materials.